Antistatic shoes require volume resistance between 10E6 ohms and 10E9 ohms, as long as they are qualified within this range.Sole resistance must be in 0.5 x 10 e5 Ω to 1.0 x 10 e8 Ω range.Work at ordinary times is the resistance of the ground should be no greater than 1.0 * 10 ^ 8 Ω
Anti-static shoes are a kind of work shoes worn by The production workshops and advanced laboratories of The microelectronics industry such as Electronic semiconductor devices, The Electronic computer, Electronic communication equipment and integrated circuit to reduce or eliminate The harm of static electricity.Antistatic shoes can guide the static electricity from the human body to the earth, thereby eliminating the static electricity of the human body, and also effectively inhibit the dust generated by personnel walking in the dustless room.Suitable for pharmaceutical factory, food factory, electronic factory clean workshop, laboratory and so on.Anti-static shoes adopt loose electricity material PU or PVC material to make the sole. The sole is made of anti-static and non-slip material, which can not only absorb sweat and prevent odor, but also achieve anti-slip, anti-static and other functions. The shoes are integrated with the upper and then reinforced online.Can effectively leak static electricity, together with anti - static clothing constitute a complete anti - static system.
Anti - static shoes are also known as static shoes, anti - static work shoes.
(1) can be divided into two categories: anti-static shoes and anti-static slippers.
Anti-static shoe styles can be divided into:
(1) low-top shoes: medium towel shoes (full-top shoes), eyelet shoes, mesh shoes, mesh shoes, ladle head.
(2) boots: soft boots, hard boots, etc.
(3) anti-smashing shoes: steel baotou shoes.
(1) anti-static shoes are protective shoes that can eliminate static electricity and prevent electric shocks below 250V. This product is manufactured according to gb4385-1995 standard.
(2) it is mainly used in places where electrostatic hazards such as combustion and explosion may be caused by static electricity in human body (such as workplaces in petroleum, chemical industry, coal mine, printing, rubber, medical treatment, purification and electronics industries).
(3) anti-static shoes and conductive shoes should not be worn at the same time when wearing thick socks made of insulating wool and insulating insoles. Anti-static shoes are prohibited to be used as insulating shoes.
(4) the place where anti-static shoes are used shall be the anti-static ground, and the place where conductive shoes are used shall be the conductive ground to achieve a good anti-static or conductive effect.
(5) anti-static shoes should be used together with anti-static clothes, and pay attention to the cleanness, waterproof and moisture-proof of the products.
(6) the resistance test shall be carried out within 200 hours during the wearing process. If the resistance is not within the specified range, it cannot be used as anti-static shoes.Antistatic shoes require resistance between 100K ohms and 1000M ohms.